# Reducing draughts around doors without blocking ventilation

- Link: https://penguinpropertysolutions.com.au/index.php/2026/09/27/reducing-draughts-around-doors-without-blocking-ventilation/
- Published: 2026-09-27T14:00:00+09:30
- Author: Penguin Property Services

![Door threshold with a plain draught strip](https://penguinpropertysolutions.com.
au/wp-content/uploads/2026/10/reducing-draughts-around-doors-without-blocking-ventilation-
fleurieu-1013-1yk6IRVl-1024x683.webp)

Draughts around doors can make a room feel uncomfortable, especially in coastal 
wind. Before adding seals, check whether the draught comes from a worn seal, poor
door alignment or an intentional ventilation opening. Those are different problems
with different solutions.

## Find draughts around doors

On a windy day, feel around the closed door with your hand or hold a light strip
of tissue near the edge. Do not use a flame. Check the existing seals for gaps, 
dirt or sections that have peeled away.

## Choose a modest fix

 1. Clean the contact surfaces using a method suitable for the door finish. Let them
    dry before applying an adhesive product.
 2. Measure the gap and read the seal manufacturer's sizing instructions. An oversized
    seal can stop the door latching properly.
 3. Use a product suitable for the door material and exposure. Follow the fitting instructions
    rather than stretching the seal around corners.
 4. Close and reopen the door several times. Check the latch and make sure no one needs
    excessive force to operate it.
 5. Recheck after a few days, particularly where adhesive strips meet at corners.

## Test the bottom gap first

A removable draught stopper can help identify whether the bottom gap is the main
source before you choose a permanent product. Keep it clear of exit routes and remove
it when the door is used.

## Important limits

Do not block required vents, combustion-air openings, drainage paths or ventilation
for gas appliances. Fire doors and specialist door systems need suitable professional
advice. A swollen, sagging or damaged door needs its underlying fault addressed 
rather than simply adding more seal.

For a related practical guide, read [A monthly walk-through to catch small property problems](https://penguinpropertysolutions.com.au/index.php/2026/09/27/a-monthly-walk-through-to-catch-small-property-problems/).

Keep the product packaging or model details with your maintenance notes. At the 
next inspection, look for peeling ends and check that the door still closes easily.
Report recurring movement or damage instead of repeatedly replacing the same strip.
